Image Hosted by ImageShack.us


-Hg da http://www.selenic.com/mercurial/
sudo apt-get install mercurial
-Kernel-sources o kernel-headers per poter caricare il modulo (uname -a per la versione)
sudo apt-get install linux-headers-$(uname -r)
Installazione drivers

Spostarsi su un terminale e digitare
hg clone http://linuxtv.org/hg/~mrechberger/v4l-dvb-kernel
cd v4l-dvb-kernel
sudo make
sudo make install


caricare i driver da root:

sudo modprobe em28xx # per tv analogica
sudo modprobe em2880-dvb # per dispositivi ibridi dvb-t


cd /lib/firmware/vostro_kernel
sudo wget http://konstantin.filtschew.de/v4l-firmware/firmware_v3.tgz
sudo tar xvzf firmware_v3.tgz


sudo tail -f /var/log/messages
Se tutto corretto..all’inserimento della penna dovremmo vedere questo output
Jan 3 18:55:06 a6j kernel: [119229.864000] usb 5-3: new high speed USB device using ehci_hcd and address 6
usb 5-3: configuration #1 chosen from1 choice
[119230.004000] em28xx #0: Alternate settings: 8
[119230.004000] em28xx #0: Alternate setting 0, max size= 0
[119230.004000] em28xx #0: Alternate setting 1, max size= 0
[119230.004000] em28xx #0: Alternate setting 2, max size= 1448
[119230.004000] em28xx #0: Alternate setting 3, max size= 2048
[119230.004000] em28xx #0: Alternate setting 4, max size= 2304
[119230.004000] em28xx #0: Alternate setting 5, max size= 2580
[119230.004000] em28xx #0: Alternate setting 6, max size= 2892
[119230.004000] em28xx #0: Alternate setting 7, max size= 3072
[119230.396000] input: em2880/em2870 remote control as/class/input/input6
[119230.396000] em28xx-input.c: remote control handlerattached
[119230.396000] attach_inform: eeprom detected.
[119230.424000] em28xx #0: i2c eeprom 00: 1a eb 67 95cd 0c 42 00 50 12 5c 03 6a 32 9c 34
[119230.424000] EEPROM ID= 0x9567eb1a
[119230.424000] Vendor/Product ID= 0ccd:0042
[119230.424000] AC97 audio (5 sample rates)
[119230.424000] 500mA max power
[119230.424000] Table at 0x06, strings=0x326a, 0x349c,0x0000
[119230.428000] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[119230.428000] attach inform (default): detected I2Caddress c2
[119230.432000] Tuner: setting up tuner core extensionfor: Xceive 3028 Tuner
Jan 3 18:55:07 a6j kernel: [119230. Loading base firmware: xc3028_init0.i2c.fw
Jan 3 Loading default analogue TV settings xc3028_BG_PAL_A2_A.i2c.fw
Jan 3 18:55:08 a6j kernel: [119231.604000] attach_inform: tvp5150 detected.
Jan 3 18:55:08 a6j kernel: [119231.668000] tvp5150 0-005c: tvp5150am1 detected.
Jan 3 18:55:08 a6j kernel: [119231.760000] em28xx-video.c: requesting em2880-dvb!
Jan 3 18:55:08 a6j kernel: em28xx #0: V4L2 VBI device registered as /dev/vbi0
Jan 3 em28xx #0: V4L2 device registered as /dev/video0
Jan 3 18:55:08 a6j kernel: [119231.768000] em2880-dvb.c: DVB Init
Jan Loading base firmware: xc3028_8MHz_init0.i2c.fw
Jan 3 Loading default dtv settings: xc3028_DTV8_2633.i2c.fw
Jan 3 18:55:09 a6j kernel: xc3028-tuner.c: sending extra call for DVB-T
DVB: registering new adapter (em2880 DVB-T).
DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
[119232.948000] em28xx #0: Found Terratec Hybrid XS
[ usbcore: registered new interface driver snd-usb-audio


Ci siamo quasi..prima di utilizzare il nostro programma preferito dobbiamo prima tarare le frequenze della nostra zona in un file chiamato channels.conf
collegatevi al sito dgtvi per controllare la vostra copertura
Aprite un editor a vostro piacimento

per ogni MUX che trovate create delle righe con la seguente sintassi: T FREQUENZA000000 8MHz 2/3 1/2 QAM64 8k 1/32 NONE

Dove FREQUENZA è il numero a tre cifre presente sotto la colonna frequenza
del sito dgtvi.

# MUX DFREE (Canale 5,Italia1,SportItalia,LCI,RadioItalia Tv)
T 538000000 8MHz 2/3 1/2 QAM64 8k 1/32 NONE
T 706000000 8MHz 2/3 1/2 QAM64 8k 1/32 NONE

# MUX LA7/MTV (La 7,MTV ITALIA,Canale D,Music Box)
T 506000000 8MHz 2/3 1/2 QAM64 8k 1/32 NONE

# MUX RTI (Rete 4,Class News,Sole 24 Ore TV,BBC World)
T 842000000 8MHz 2/3 1/2 QAM64 8k 1/32 NONE

# MUX-B RAI (Rai Utile,Rai Doc,RaiSportSAT,RaiNews24,Rai EDU1)
T 482000000 8MHz 2/3 1/2 QAM64 8k 1/32 NONE

Salvate il file rinominandolo ad esempio ‘frequenze’
Scaricare quindi il tool linuxtv-dvb-apps
sudo make
Copiare il file ‘frequenze’ nella directory dell’applicazione ‘scan’ appena installata e lanciate
scan frequenze
Il risultato sara’ piu’ o meno questo(tagliato per motivi di spazio)


Copiate ed incollate in un file rinominato channel.conf e poi spostatelo della directory /video (vedi wiki nella stessa sezione installazione xine+vdr) oppure in quella di kaffeine

Se ci sono problemi basta seguire il wiki ufficiale Em2880-dvb
wiki ufficiale Terratec italia
wiki Demodulator

I chip integrati della Cinergy Hybrid
Schede compatibili 100% con VDR
Free Image Hosting at www.ImageShack.usFree Image Hosting at www.ImageShack.usFree Image Hosting at www.ImageShack.us
Free Image Hosting at www.ImageShack.usFree Image Hosting at www.ImageShack.us

Ecco il dispositivo in funzione con xine+vdr e Kaffeine.Da notare Rai Utile che seppur disturbato..si vede lo stesso

Free Image Hosting at www.ImageShack.usFree Image Hosting at www.ImageShack.usFree Image Hosting at www.ImageShack.usFree Image Hosting at www.ImageShack.us

Related Posts Plugin for WordPress, Blogger...

Il tuo indirizzo ip:

Valutazione 3.00 su 5
happy wheels 2 demo


Senza categoria


Commenti via Facebook:

Leave a Reply

Your email address will not be published. Required fields are marked *



  • Wow, this paragraph is fastidious, my sister is analyzing these kinds of things, therefore I am going to inform her.


  • It is appropriate time to make a few plans for the
    long run and it is time to be happy. I have learn this put
    up and if I could I desire to recommend you some attention-grabbing
    issues or suggestions. Maybe you can write next articles referring to this article.
    I want to read more issues approximately it!


  • Good article. I definitely appreciate this site. Keep it up!


  • Hi i am kavin, its my first occasion to commenting
    anyplace, when i read this piece of writing i thought i could also create comment due to
    this brilliant post.


  • If you want to get a good deal from this paragraph then you have to apply such techniques to
    your won blog.


  • Excellent post! We will be linking to this particularly great article on our site.
    Keep up the great writing.


  • I do agree with all the ideas you have offered on your post.
    They’re really convincing and can definitely work. Still, the posts are too quick for beginners. May you please extend them a little from next time? Thanks for the post.


  • Great post. I used to be checking constantly
    this weblog and I’m inspired! Extremely helpful information specially the closing part 🙂 I care for such info much. I used to be seeking this particular info for a very lengthy time. Thanks and good luck.